A) The data transmission rates tend to be lower than dial-up or dedicated circuits.
B) You don't have to set up dedicated circuits between each end point from and to which you wish to transmit data and/or voice.
C) You have the flexibility to send data through a temporary circuit between two connections that will be disconnected as soon as the digital transmission is completed.
D) All circuits are less susceptible to a great deal of noise because they are digital.
E) You don't have to specify all the interconnecting services you need for your WAN when you buy the service.
Correct Answer
verified
Multiple Choice
A) Ethernet
B) TCP
C) MPLS
D) IRoute
E) T1
Correct Answer
verified
True/False
Correct Answer
verified
True/False
Correct Answer
verified
True/False
Correct Answer
verified
True/False
Correct Answer
verified
True/False
Correct Answer
verified
Multiple Choice
A) is typically offered only to commercial customers
B) provides a communications circuit with two 64 Kbps B channels, plus one D channel
C) is defined exactly the same way in Europe
D) has an upper capacity of 128Kbps
E) is comprised of analog circuits only
Correct Answer
verified
Essay
Correct Answer
Answered by ExamLex AI
View Answer
Multiple Choice
A) local carrier network
B) virtual private network
C) integrated service digital network
D) software defined network
E) SONET network
Correct Answer
verified
True/False
Correct Answer
verified
Multiple Choice
A) usually provide relatively long routes through the network compared to ring networks)
B) require more processing by each computer in the network than in star or ring networks
C) do not use decentralized routing
D) do not have much capacity wasted by network status information
E) do not have many possible routes through the network to prevent one circuit from becoming overloaded
Correct Answer
verified
Short Answer
Correct Answer
Answered by ExamLex AI
View Answer
Multiple Choice
A) bus design
B) star design
C) full mesh design
D) ring design
E) partial mesh design
Correct Answer
verified
True/False
Correct Answer
verified
Multiple Choice
A) is a standard for optical transmission that currently operates at Terabit per second speeds
B) is very similar to the ITU-T standard, synchronous digital hierarchy
C) uses inverse multiplexing above the OC-1 level
D) refers to Sprint Overall Network
E) is not currently available, even in large cities
Correct Answer
verified
Multiple Choice
A) failure in one circuit means that the network can most likely continue to function
B) failure in one circuit always means that the network will cease to function
C) failure in one computer always means that the network will cease to function
D) failure in one circuit means that there will not be any increased traffic delays in the network
E) failure in one computer always means that messages will stop at that computer since it would be impossible to re-route traffic
Correct Answer
verified
Multiple Choice
A) circuit switched network
B) dedicated circuit network
C) dial up circuit network
D) packet switched network
E) Fractional T-1 network
Correct Answer
verified
Multiple Choice
A) WANs
B) LANs
C) Circuit-switched networks
D) Dedicated-circuit networks
E) Routed-backbone networks
Correct Answer
verified
True/False
Correct Answer
verified
Showing 41 - 60 of 77
Related Exams